Katalog Produk

Keterangan

MEMORY

DRAM
32MB standard

Flash
8MB standard ( 16MB optional)

PRINTING CHARACTERISTICS

Print Speed
T5204r-4� : 10 IPS @ 203 dpi ( 254mm/ sec)

T5304r-4� : 8 IPS @ 300 dpi ( 203mm/ sec)

T5206r-6� : 10 IPS @ 203 dpi ( 254mm/ sec)

T5306r-6� : 8 IPS @ 300 dpi ( 203mm/ sec)

T5208r-8� : 8 IPS @ 203 dpi ( 203mm/ sec)

T5308r-8� : 6 IPS @ 300 dpi ( 152mm/ sec)

Printing Methods
Thermal transfer or direct thermal

Resolution
203/ 300 dpi ( operator interchangeable)

Printable Width
4.1� max ( 104mm) T5204r, T5304r

6.6� max ( 168mm) T5206r, T5306r

8.5� max ( 216mm) T5208r, T5308r

RFID ENCODING ( OPTIONAL UPGRADE KIT) ( Excludes 8� printers ( T5208r/ T5308r)

UHF encoder set to global frequency standards; supports EPCglobal

Class 0, 0+ , 1, Gen 2 and Philips UCode 1.19 standards

Operation Modes
Write/ Verify/ Print - writes RFID data to tag and verifies contents are written correctly, while also printing the desired image

Error Handling Modes
Overstrike - when a bad RFID tag is detected, overstrikes label and applies the data to the next label

Stop - when a bad tag is detected, stops the printer to allow for user intervention

Statistics Tracking
Tracks number of tags written to and number of bad tags detected

MEDIA COMPATIBILITY

Media Types
Roll or fanfold

Labels, tags and tickets

Paper, film or synthetic stock

Thermal Transfer or Direct Thermal

Media Width
1.0� to 4.5� T5204r , T5304r

2.0� to 6.8� T5206r , T5306r

3.0� to 8.75� T5208r , T5308r

Media Thickness
0.0025� to 0.010�

Roll Core Diameter
3.0� ( 7.6 cm)

Maximum Roll Diameter 8.0� ( 20.9 cm)

Thermal Transfer Ribbon

-Ribbon Width ( min/ max)
1.0� to 4.33� T5204r , T5304r

2.0� to 6.8� T5206r , T5306r

3.0� to 8.75� T5208r , T5308r

-Maximum Ribbon Length
625m

MEDIA HANDLING CHARACTERISTICS

Tear-Off
Individual label tear-off

Tear-Off Strip
Label strips tear-off

Continuous
Labels print continuously

Cut
Label cut to length

Peel-Off
Label peel and present

( peel-off mode requires rewind option)

MEDIA HANDLING OPTIONS

Rewinder
Required for peel and present, not recommended for batch rewind of RFID labels

Cutter Kit
Cuts labels after printing specified number of labels

OPERATOR CONTROLS & INDICATORS

Operator Controls
Off Line-On Line, Test Print, Job Select, Form Feed Menu, Cancel, Enter

Message Display
32 character

Indicators
Off Line-On Line, Menu

BAR CODE VALIDATION

Optional
Online Data Validation ( ODV) - verifies bar code quality, overstrikes failed bar codes, and reprints a label

Compatible with RFID encoding

PROGRAMMING LANGUAGES

Standard
Printronix Graphics Language ( PGL)

Zebra Graphics Language ( ZGL) *

TEC Graphics Language ( TGL) *

Intermec Graphics Language ( IGL) *

Sato Graphics Language ( STGL) *

Datamax Graphics Language ( DGL) *

XML - Extensible Mark-up Language

* Printer Protocol Interpreters for ZPL, TEC, IPL, Sato and DPL with RFID commands for ZPL and Sato only

Optional
IPDS over Ethernet, Twinax or Coax

PROTOCOLS

Optional
Telnet TN5250/ TN3270

INTERFACES

Standard
RS232 Serial

IEEE 1284 ( Centronics)

USB 2.0

Optional
Ethernet ( supports PrintNet Enterprise and PXML) Wireless ( 802.11b) ( supports PrintNet Enterprise and PXML) Coax/ Twinax GPIO ( General Purpose Input/ Output)

FONTS, GRAPHICS SUPPORT, WINDOWS DRIVERS

Fonts
OCRA, OCRB, Courier, Letter Gothic, CG Times, CG Triumvirate, CG Triumvirate Bold, CG Triumvirate Bold Condensed

Character Set
Unicode with TrueType font support

Graphic Support
PCX, BMP and TIFF file formats

Windows Drivers
Microsoft Windows NT/ 2000/ XP

POWER REQUIREMENTS

Line Input
90-264 VAC ( 48-62Hz) PFC

Power Consumption
150 watts ( typical)

Regulatory Compliance
FCC-B, UL, CSA, ETSI EN 300 220, CE

ENVIRONMENTAL CONSIDERATIONS

Operatin